Only Registered Author(s) will be allowed to present their paper, subject to a limit of maximum two... more
Authors Have to Register for the AIMTDR 2018 Conference on or before 24th October 2018.
Authors Kindly See the Tentative list of Accepted papers.
0
1
2

AIMTDR 2018 Countdown timer


Tentative list of accepted papers for Oral presentation of Case Study

Printer-friendly versionSend by emailPDF version

AIMTDR 2018

General Instructions to Author(s):

Only registered authors will be allowed to present their paper, subject to a limit of maximum two papers per registration.

The papers submitted by the registered authors will be forwarded to M/s Springer.

M/s Springer will publish the papers selected according to their publication policy, as Proceedings Book Volume.

Authors have to register for the AIMTDR 2018 conference through the website (www.aimtdr2018.com) on or before 24 October 2018

 

Tentative list of accepted papers for Oral presentation of Case Study
 

 

Paper Id

Paper Title

Author(s) Name

11745

Rapid Product Development from an Existing Product Using Reverse Engineering Method

Gourab Sen 

10914

Design of Row Based Machine Layout - A Case Study

Srinivas C, Naveen Ravella, Ramgopal Reddy B 

11640

Comparative Study On the Performance of Different Drill Bits for Drilling CFRP

Sowjanya N S, Ladeesh V G, Manu R, Jose  Mathewâ  

11789

Development of Prototype Variable Geometry in-Pipe  Robot for Reconfigurable Applications

Satheesh Kumar G, Ajin Ganesh, Pon  Vignesh Pappu  

11450

An Experimental Investigation on Productivity and Product Quality during Thin-Wall Machining of Aluminum alloy 2024-T351

Gururaj Bolar, Shrikrishna N. Joshi 

11536

Optimization of conditioning gas and enhancement of material removal rate during plasma processing of fused silica

Enni  Krishna, D Sam Dayala Dev, Manas Das 

10712

Manufacturing Standardisation of Jaipur Foot by Additive Manufacturing

Harlal Singh Mali, Aniket  Singh 

11707

Nano Finishing of Ferromagnetic Air Compressor Cylinder Using MFAF Process

Manas Das, Kunal  Sharma, Ambrish  Singh 

11802

 Design, Manufacturing and Synchronized Motion for Upper Body Parts of Humanoid Robot

Sohan Bulge, Danish Babla, Mrunalinee Koli, Shantipal Ohol 

11495

DEVELOPMENT OF A BORE USING JET ELECTROCHEMICAL MACHINING (JECM) IN SS316 ALLOY

Vivek N, Deepak J, Mouliprasanth B  Dr.P.Hariharan,

11942

Challenges in machining of Silica-Silica cone for aerospace application

Ashish Tewari, Tankasala Srinivasulu, Bandaru Hari Prasad, Anil Prasad Dash 

11459

A Study of Wire Electrical Discharge Machining of Carbon Fibre Reinforced Plastic

Hrishikesh Dutta, Kishore Debnath, Deba Kumar Sarma 

11945

Machining and characterization of Channels on Quartz Glass using Hybrid Non-conventional Machining Process: µ-ECDM

Bindu Madhavi  J, Somashekhar Hiremath 

10873

Fused Deposition Modeling Using 6-Axis Industrial Robot

Sri Harsha Arigela, Vikram Kumar Ch R 

11443

Study on Actuation Characteristics of NiTiCu SMA Thin Film Deposited on Flexible Substrate

Jayachandran S, Brolin A, Hari Vishanth, Akash  K, Palani I A 

11843

Remote Monitoring of Axle loads for Heavy Commercial Vehicles :WABCO paper

Richard Alexander M, Hudson V, Pozhilan    

11518

Influence of Laser Shock Peening on Wire Arc Additive Manufactured Low Carbon Steel

Manikandan M, Mani Prabu S S, Jayachandran S, Akash  K, Palani I A, K P Karunakaran 

11072

Peeling Mechanisms Used in DLP 3D Printing Technology

Yogesh Patil, Richa Patil, N S  Chandrashekhar, K P Karunakaran 

12603

Development of alignment fixture for precision assembly of aerospace control surfaces incorporating process and assembly variations

N Sankaranarayanan, Ch Venkateswarlu, G Ravinder

11840

Concept Design and Development of Position Sensor for Pneumatic Door Cylinder of Door Control System : WABCO Paper

Prasad Kumar D, Dinesh Kumar G, Rajaraman A.N 

12592

Automated In-line/Off-line Measurement Using a High Resolution 3D Sensor Based on Focus Variation

Darukumalli S, Danzl R, Helmli F

11697

Process mechanization and automation for Hybrid TIG MAG arc welding

Onkar Sahasrabudhe, Dadarao Raut 

11289

TIRE’s value management for environmentally sustainable resource utilization

Lokesh Kumar, Pramod Jain,  Apurbba   Sharma 

11635

DESIGN DEVELOPMENT OF A PORTABLE GREEN SOLAR COOKER

Santosh Kumar 

11699

Complementing Learning of Metal Forming Processes via Virtual Simulation Lab

Rahul Swarup Sharma, Ankit  Sahai 

11425

Characterization of Cutting Edge Radius of a Single Crystal Diamond tool by Atomic Force Microscopy

Akhilesh  Gupta, Ganesan  G, Sonal Sonal, Rakesh G. Mote, R. Balasubramaniam, A.S. Rao 

11795

SIX SIGMA IN BATTERY ASSEMBLY OF SKID STEER LOADER

Mithun M 

11192

Design and development of a pump driven variable buoyancy engine (VBE) for autonomous underwater vehicles/gliders

Brij Kishor Tiwari, Dr. Rajiv  Sharma 

11286

Generation of sequence of machining operations through visualization of end product

Gvss Sharma, P. Srinivasa Rao, B Surendra Babu 

10746

An Artefact Based Continuous Performance Verification of Coordinate Measuring Machine

Goitom Tesfaye, Rajendra Rega 

11791

Design, Development and Modeling of EMLA based  Wheel Brake Actuation System for an UAV

Satish Babu, Pollov Sarmah, Vijayvittal Pn 

10972

Development of Welding Fixture for Rocket Motor Casing Assembly

Venkateswarlu Chepuru 

11771

DESIGN & ANALYSIS OF HYDRAULIC FIXTURE FOR WABCO BODY HOUSING

Govindu  Vamshikrishna, Seshasai Gurudutta, Pranav Ravindrannair, Md Israr Equbal 

11767

Design Analysis of Brass Cartridge Case for Water-jet Application

Bhupesh Parate, Sharad   Khandagale, Sunil  Chandel, Himanshu Shekhar 

11625

Application of Value Analysis and Value Engineering for Cost Reduction of Global Pumping Unit

Dattaji Shinde, Avinashi Sah, Avinash Sah 

12603

Development Of Alignment Fixture For Precision Assembly Of Aerospace Control Surfaces Incorporating Process And Assembly Variations

Sankaranarayanan N, Ch Venkateswarlu, G Ravinder, Shivpal Singh

11307

MONITORING THE DYNAMICS AND TRACKING OF A VEHICLE USING INTERNET OF THINGS (IoT)

Sriharsha  Dorapudi, Vivek Varma  Buddharaju 

10870

Assessment of Cutting Tool Reliability During Turning Considering Effects of Cutting parameters and Machining Time

Mohamad Gaddafee, Satish Chinchanikar 

11844

Virtual Simulation with Statistical Approach on "Performance Optimization" :WABCO Case study

Hudson P V, Vinoth Kumar R, Vivek S, Anbarasu G 

11865

Productivity improvement by reduction of cycle time through implementing Clustering; a case study

Satbir Singh, Sandeep Singhal 

11905

Influence of TMTM as secondary accelerator on blooming resistance of NBR-PVC blends  :WABCO Case Study

Ananthanarayanan R, Shanmugham S 

11846

Study on aesthetic behavior of Anodic oxidation in ADC12 Aluminum alloy :WABCO Case Study

Balaji Vp, Karthi  S, Shanmugam S 

10765

Two-sided Assembly Line Balancing Problem Type-I – A Company Case Study Solved by Exact Solution Approach

Ashish Yadav 

11864

GENERATION OF SPLINES THROUGH AN ALTERNATE METHOD :CEEYES CASE STUDY

Suresh Kumar G 

11529

An approach of minimizing energy consumption in the machining system using job sequences varying technique

Md Shahzar Jawaid, Dr. Sharad Chandra Srivastava, Dr. Somak Datta 

11692

Development of cost effective automatic packing system for small scale industries

Vaibhav Gaunkar, Sudheer A P 

11748

A Cyber-physical system improves the quality of machining in CNC milling machine - A Case Study

Ganesh Kumar Nithyanandam, Saravana Kumar  Sellappan, Selvaraj  Ponnumuthu 

11842

Flow path optimization of pneumatic valves through CFD analysis:WABCO Paper

Prabhakar N, Gopinath G, Bharathiraja S, Praveen M, Swaroop Raj Vr 

11904

Redesigning ECMM Fixture with part consolidation and DfAM principles

Prithvirajan R, Mohan Kumar  K, Arumaikkannu G 

11790

Tailored Support Structures for Additive Manufacturing

Hemnath Kumar Anandan, Reginald Elvis, Madhanagopal Manoharan, Jayakrishnan Jayapal, Senthilkumaran Kumaraguru 

11393

Topology and Build Path Optimization for Reducing Cost in FDM Uprint SE

Ravi T, Rajesh  Ranganathan 

11709

Indigenous Development of Laser Additive Manufacturing Technology

C P Paul, S K Mishra, P Bhargava, K S Bindra 

10941

Life Cycle Assessment of an Additive Manufactured automotive component

Rohit Agrawal, Vinodh S 

11201

Optimization of tool and process parameter for injection molded component

Pratyush Kar, Vamsi Krishhna P 

11693

STUDY AND ESTABLISHMENT OF MANUFACTURING PROCESS OF MOLYBDENUM LINERS USING FLOW FORMING PROCESS

Pssrk Prasad, Navneet Verma, Narendra Kumar, Dr. Km Rajan 

11507

Enabling Industry 4.0 Through Digitizing Shop Floor in Automotive Industry

Jegadheeson A.J., Sunil Mutha, Karunamoorthy L., Ramasubramanian B. 

11333

Mechanical Characterization and Microstructural Investigation of Micro plasma arc welded AISI 316L thin stainless steel sheets

Srikant Prasad, Vigneshwaran K, Dibakor Boruah, Pintu Thakur

 

Only registered authors will be allowed to present their paper, subject to a limit of maximum two  papers per registration.

The papers submitted by the registered authors will be forwarded to M/s Springer.

M/s Springer will publish the papers selected according to their publication policy, as Proceedings Book Volume.

Authors have to register for the AIMTDR 2018 conference through the web-site (www.aimtdr2018.com) on or before 24 October 2018