Only Registered Author(s) will be allowed to present their paper, subject to a limit of maximum two... more
Authors Have to Register for the AIMTDR 2018 Conference on or before 24th October 2018.
Authors Kindly See the Tentative list of Accepted papers.
0
1
2

AIMTDR 2018 Countdown timer


Tentative list of accepted papers for Oral presentation

Printer-friendly versionSend by emailPDF version

 

AIMTDR 2018


General Instructions to Author(s): 
Only registered authors will be allowed to present their paper, subject to a limit of maximum two papers per registration. 
The papers submitted by the registered authors will be forwarded to M/s Springer. 
M/s Springer will publish the papers selected according to their publication policy, as Proceedings Book Volume.
Authors have to register for the AIMTDR 2018 conference through the website (www.aimtdr2018.com) on or
before 24th October 2018.  

 

Tentative list of accepted papers for Oral presentation

Paper Id

Paper Title

Author(s) Name

10370

Powder Mixed Near Dry Electric Discharge Machining Process Parameter Optimization for Tool Wear Rate

Sanjay Sundriyal, R S  WALIA,Vipin Vipin 

10703

Design and Development of Combination Tool for Drilling and Tapping Operation on PVC Polymeric Material

Yogesh Kamble, Dr.P.D. Pantawane, Dr.Rajiv B, Dr.B.B. Ahuja 

10713

Fabrication of Customised Ankle Foot Orthosis (AFO) by Reverse Engineering using Fused Deposition Modeling

Harlal Singh Mali, Shivendra  Vasistha 

10764

Study of cutting temperature and chip formation in drilling of AA6351 B4C composite

Thirumalai Kumaran S, Samy G.S, Uthayakumar M, Tae Jo Ko 

10773

Friction stir welding of three dimensional printed polymer composites with semi-consumable tool

Rupinder Singh, Ranvijay Kumar, IPS Ahuja 

10784

Effect of Heat Treatment on Formability of AA6082 by Single Point Incremental Forming Process

Maharajan S, Ravindran D, Rajakarunakaran S 

10806

Comparative study of Dielectric and Debris flow in μED-Milling process using Cylindrical and Slotted tools

Satish Mulya, Ganesh Karthikeyan 

10814

Bio-Inspired Knowledge Representation Framework for Decision Making in Product Design

Varun Tiwari, Prashant  Jain, Puneet Tandon 

10825

Heuristic Algorithmic Approach for Automatic Generation of Pin Layout for Robotic Unloading of Sheet Metal Parts

Ramesh Babu Amarapuram 

10833

A Study of Parameters Affecting Cutting Force in MQL Assisted Cross Peripheral Grinding of Alumina Ceramic

Manu A V, LADEESH V G, Manu R 

10834

On Microstructure and Flexural Behaviour of Microwave Processed Functionally Graded Clads

Sarbjeet Kaushal 

10841

Some Investigations on Drilling of Alluminium alloys from FEA based Simulation using Deform-3D

REDDY SREENIVASULU, Chalamalasetti SrinivasaRao 

10842

Forming behaviour of AA5052-H32 & AA6061-T6 during Single Point Incremental Forming

Manoj Ghadmode, Rahul Pawar, Bhagwan Sonawane 

10843

Self-Organizing Migrating Algorithm to Minimize Module Changes at Machine-Level in Reconfigurable Manufacturing

L N Pattanaik 

10857

NUMERICAL INVESTIGATION ON SINGLE POINT INCREMENTAL FORMING (SPIF) OF TAILOR WELDED BLANKS (TWBs)

Jeet Raut,  Shalin Marathe, Harit Raval 

10865

Processing and Characterization of a High entropy alloy ( AlCuFeNiCr) in Application to Golf Club Head

SRINIDHI  N A, M RAMACHANDRA 

10866

Condition Monitoring of Abrasive Waterjet Milling Using Acoustic Emission and Cutting Force Signals

Goutham U, Kanthababu M, Sunilkumar K R, Mathanraj M, Gowri S, John Rozario Jegaraj

10888

A Novel SQL Method to Assess Grindability of Inconel 718

Santanu Das, Sirsendu Mahata, Bijoy Mandal, Manas Bhattacharya 

10895

Voxel based strategy for efficient CNC Machining

Aman Kukreja, Hrishikesh Mane, Mandeep Dhanda, Sanjay Pande 

10900

Parametric Investigation into Electrochemical Micromachining for Generation of Different Microsurface Textures

SANDIP KUNAR, SUBRATA MAHATA 

10910

Force and Thermal Variational Analysis by FE Approach on  Dry Turning of Inconel 718

Bishal  Das, Jibin  T Philip, Kore Mahesh, Basil Kuriachen 

10911

Design and Development of Improved Ball End MR Finishing Tool with Efficacious Cooling System

Dilshad Ahmad Khan, Zafar Alam, Faiz Iqbal, Sunil  Jha 

10915

Performance of Carbon Nanotubes based Cutting oil on Turning of AISI 1040 Steel

M Amrita, Yogesh Chandra, Venkata Ramana, Shyam Sai, Chatti Sreeram 

10924

Experimental Investigation and Finite Element Modeling of Electrical Discharge Machining using Hollow Electrodes and Injection Flushing

Tony M Shaju, Dr.G.L. Samuel . 

10926

Experimental Analysis and Modeling of Surface Roughness, Induced Vibrations and Tool Wear in Turning of Hardened AISI52100 Steel

NITIN AMBHORE, Dinesh Kamble, Satish Chinchanikar 

10938

Effect of Geometrical and Process Parameters on Utilization of Sheet Material in Plasma and Laser Cutting Processes

Ramesh Babu Amarapuram, Venkatesh N, Sabari Sriram S, Satish Chandran V 

10942

Investigations into Wire Electrochemical Machining of Stainless Steel 304

Vyom Sharma, Vijay Kumar Jain, Dr.J. Ramkumar . 

10943

Investigations on the Influence of Serration Parameters on Cutting Forces

Pritam Bari, Pankaj Wahi, Mohit Law 

10944

Investigation of Thermo-Fluidic Transport and Cyclic Thermal Loading Effects during Selective Laser Melting of AZ91 powder

Ashish Mishra, Arvind Kumar 

10945

Effect of Minimum Quantity Lubrication on Tool Wear and Surface Integrity during Hard Turning of EN31 Steel

Jitendra  Verma, Gaurav Bartarya, Jitendra  Bhaskar 

10964

Simulation of Laser Additive Manufacturing of Overlap Tracks Geometry

A Kumar, C P Paul, G K Mishra, U Kumar, A Sahu, K S Bindra 

10970

Nanofinishing of External Cylindrical Surface of C60 Steel Using Rotating Core Based Magnetorheological Finishing Process

Manpreet Singh, Ashpreet Singh, Anant Kumar Singh 

10976

Experimental and Numerical Characterization of Residual Stresses in Tailor Welded Blanks after Springback

Vijay Gautam, D Ravi Kumar, Subhajit Konar 

10980

Prediction of Cutting Forces in Micro Milling of P-20 Steel by TiAlN Coated WC Tool: An Analytical Approach

PRIYABRATA SAHOO, KARALI PATRA, TEJ PRATAP 

10987

Effect of Mechanical Constraints on Thermo Mechanical Behaviour of Laser Welded Dissimilar Joints.

BIKASH KUMAR, RACHIT NAWANI, SWARUP  BAG 

10998

Thermal modelling and simulation of crater generation on wire electrode during Wire EDM operation

Sanghamitra Das, Shrikrishna N. Joshi 

11001

Effect of Laser Parameters on Laser Induced Plasma Assisted Ablation (LIPAA) of Glass

Upasana Sarma, Shrikrishna N. Joshi 

11005

Microstructure and Mechanical Properties of Atmospheric Plasma Sprayed 8YSZ Thermal Barrier Coatings

Nikhil Kadam, G. Karthikeyan, Dhananjay Kulkarni 

11015

Mechanical Characterization and Process Optimization of PolyJet 3D Printing using Digital ABS with Different Part Geometries

Balaji Sontakke 

11017

Development and Experimental Study of Ultrasonic assisted Electrical Discharge Machining Process

PRAVENDRA KUMAR, SANJEEV KUMAR SINGH YADAV, SHUBHAM SRIVASTAVA 

11027

Development of Optimal Vendor Managed Inventory Models for Single Vendor Multiple Retailer Supply Chains

NARAYAN NAYAK, Amarchand Mohanty 

11028

Effect of Finishing Time on Surface Finish of Spur Gears by Abrasive Flow Finishing (AFF) Process

Anand  C.Petare  

11040

Some studies on mechanical properties of AISI 316L Austenitic Stainless Steels weldments by cold metal transfer (CMT) process

RAJESH KANNAN A, SIVA SHANMUGAM N 

11048

Fabrication and Experimental Investigation of Micro-Fluidic Channel based Mixing System using Micro-Electric Discharge Machining

Mamilla  Ravi Sankar, Siddharth Vikram, Kishor  Kumar Gajrani 

11053

Machining Performance Evaluation of Al 6061 T6 using Abrasive Water Jet Process

SAIKAT RANJAN MAITY, Pankaj  kumar Shahu 

11054

 Retrofitment of Laser Cladding System with CNC Machine for Hybrid Layer Manufacturing 

Seema Negi, Sajan Kapil, Arun Sharma, Priyanka  Choudhary, Parag  Bhargava, K P  Karunakaran 

11061

Modelling of material removal rate in near-dry EDM

Nimo Singh Khundrakpam, Gurinder Singh Brar, Dharampal Deepak 

11096

Decoding the Grinding Zone – A Study on Track Grinding Wheels

DEBADITYA CHATTOPADHYAY, SURESH VENKATRAMAN 

11097

Role of Product Development Process for NPD Success in Indian Manufacturing Industries: Quality, Cost and Technological Aspects

Sudeshna Roy, Nipu Modak, Pranab K Dan 

11104

Applicability of CaF2 solid lubricant assisted minimum quantity lubrication in turning for sustainable manufacturing

Mayur Makhesana, Kaushik Patel 

11110

Effect of Pre-Weld Solution Treatment on Mechanical and Microstructural Properties of µ-plasma Arc Welded Inconel 718

AJIT KUMAR SAHU, SWARUP BAG 

11112

Cryogenic Machining of AZ31B Magnesium alloy for Bio-Implant applications

Vaibhav  Tibrewal, Kalpit  Dak, Aundhe   Himanshu, Hema Kumar Sekar, Palaniyandi Kuppan, BALAN A S S 

11130

Pull out Forming: Experiments and Process Simulation

Santosh Kumar 

11138

Refilling of Pinhole in Friction Stir Spot Welding using Waste Chips

N Bhardwaj, R.GANESH NARAYANAN, Dr. Uday S. Dixit 

11173

Compression and Diametral Tensile Strength Analysis of Graphene - Al2O3 reinforced AA 2024 and AA 2219 Hybrid Nanocomposites

Anthony Xavior M, Ashwath P 

11178

Influence of Various tool paths patterns on Hardness used in Weld-Deposition based Additive Manufacturing

Jayaprakash Sharma Panchagnula, Shreesudha Bhaskara Mohan 

11185

Design of Open Battery Pack Interface for Electric Vehicle Personalization

Jian Zhang 

11193

A model for average surface roughness for abrasive waterjet cut metal matrix composites

PRABHU SWAMY N R, SRINIVAS S 

11194

A New Approach for Fabrication of Complex Shaped Arrayed Micro Electrodes

Dr Chandrakant Kumar Nirala, HRTEETABH  KISHORE, Anupam Agarwal 

11200

Experimental Investigation on machining parameters of Hastelloy C276 under different Cryogenic Environment

Mohammed Iqbal.U, Vignesh S 

11214

On Abrasive Jet Machining of Soda Lime Glass and Laminated Glass Using Silica Sand

Santanu Das, Arjun Karmakar, Debarpan Ghosh, DEB KUMAR ADAK, Bijoy Manda, Ahmed M, Barun Haldar 

11216

A Novel Magnetorheological Grinding Process for Finishing the Internal Cylindrical Surface.

Ankit Aggarwal, Anant Kumar Singh 

11217

Development of Manufacturability Indices for Prismatic Parts

Manish Gupta, P. K. Jain, Abinash  Swain 

11222

Tensile Strength of Modified 9Cr 1Mo Welds Produced by Cold Wire and Hot Wire Gas Tungsten Arc Welding (GTAW) processes

Aravinda Pai, Irappa Sogalad, Basavarajappa S, Prabhat Kumar 

11231

Numerical study of thermally induced residual Stress and deformation in the CO2 laser welding of AISI304 stainless steel thin plates

PARDEEP PANKAJ, Rakesh Bhadra, Avinish Tiwari, Saurav Suman, Pankaj Biswas 

11232

Dissimilar friction stir welding of DH36 shipbuilding steel and mild steel

PARDEEP PANKAJ, Avinish Tiwari, Saurav Suman, Abhishek Kumar, Rituraj  Bhattacharjee, Subhashis  Majumder, PANKAJ BISWAS 

11239

A Study on Micro-Tool and Micro-Feature Fabrication in Micro-EDM

Bishwesh Ranjan Acharya, Abhijeet Sethi, Akhil Dindigala, Partha Saha, Dilip Kumar Pratihar 

11252

Influence of Graphite Nano powder mixed Dielectric Fluid on Machining Characteristics of Micro Electric  Discharge Milling

Dinesh V, Arun pillai K V, Dr.P.Hariharan . 

11254

Simultaneous Optimization of Milling Process ‎Responses for Nano-Finishing of Steel ‎through Sustainable Production

MUHAMMED  MUAZ, SOUNAK CHOUDHURY 

11266

Multi-Step Segmentation of Radiographic weld defect images

Sowmyalakshmi R 

11269

Simulation of Torsional-Axial Chatter Vibrations in Indexable Drilling for Noise Generated

Pavan  Joshi, Mahesh  Todkar, B S Suresh, Ravi  Halasur 

11285

Design of Robot Gripper with Topology Optimization and its Fabrication Using Additive Manufacturing

Sugavaneswaran M, Sathishkumar Natesan 

11287

Realization of Green Manufacturing Using Citric Acid Electrolyte During Fabrication of Micro-Tool Made of WC-Co Alloy in Micro-WECM Process

Partha Saha, Abhijeet Sethi, Bishwesh Ranjan Acharya, Pranai Kumar, Rajib Chakraborty 

11292

Thickness evolution during end forming operations of friction stir processed AA6063-T6 tubes at different tool geometries

Arvind K Agrawal, R.GANESH NARAYANAN, Satish V Kailas 

11311

Finite Element Analysis of Sheet Thickness and Force variation in AA6063during SinglePoint Incremental Forming

Saurabh Rai, HRTEETABH  KISHORE, Harish Nirala, Anupam Agarwal 

11314

Failure Prediction and Forming Behavior of AA5754 Sheets at Warm Temperature

Sudhy S Panicker, Kaushik  Bandyopadhyay, Sushanta Kumar Panda 

11318

Geometric representation of the weld bead in DC and square AC submerged arc welding of 2.25 Cr-1 Mo heat resistant steel

Uttam Kumar Mohanty,  Abhay Sharma, Yohei  Abe, Takahiro Fujimoto, Mitsuyoshi Nakatani, Akikazu Kitagawa, Manabu  Tanaka,   Tetsuo  Suga 

11328

Effect of powder mix and ultrasonic assistance on pulse train based specific energy in EDM of D3 steel

R Rajeswari, M S Shunmugam 

11332 

Fabrication of micro-holes array through multiple electrodes with distributed μ-Pulse Electrochemical  Machining

Divyansh Patel, Mahesh Thalkar, J Ramkumar, V K Jain 

11340

Silicon micro-slot grinding under water and KOH aqueous solution

ASHWANI PRATAP, KARALI PATRA 

11341

Measurement of Bores Using Scanning Mode of Articulated Arm Coordinate Measuring Machines

Ashik Suresh, Dhanish P B 

11349

Numerical and Experimental analysis of Plasma Nitrided XM-19 stainless steel

Shivanshu  Dixit 

11353

ANALYSIS AND PREDICTION OF ELECTRICAL DISCHARGE COATING USING ARTIFICIAL NEURAL NETWORK (ANN)

RASHI TYAGI, SHAKTI  KUMAR, Vikas Kumar, Shalini Mohanty, Alok Kumar Das, amitava mandal 

11359

Performance Evaluation of Si-Cu- Hybrid Dust as a Powder Additive of EDM Dielectrics to Machine Ti6Al4V with Copper Electrode

SHIRSENDU DAS, SWARUP  PAUL, BISWANATH DOLOI 

11361

Enhancement of static and dynamic characteristics on micro lathe bed by the use of alternate form design and composite materials

Mahendrakumar Nataraj, Thyla PR, Mohanram P V, Ramu M, Prabhu Raja V, Raja Kumaran C, Manojkumar K N, Siddarth A 

11366

Magnetic Pulse Forming and Punching of Al Tubes- A Novel Technique for Forming and Perforation of Tubes

Sagar Pawar, Sachin Kore, Arup Nandy 

11367

Magneto hydrodynamic Force on High-speed Electrochemical Discharge (HSECD) Engraving

Mukund Laxman Harugade, Sachin D. Waigaonkar, Nikhil S.  Mane, Narayan V. Harugade 

11370

Machining performance prediction for zirconia toughened alumina insert in machining of high carbon steel using computational approach

Subhrojyoti Mazumder, Nilrudra Mandal 

11385

Experimental Study on Material Removal Rate and Over-cut in Electrochemical Machining of Monel 400 alloys with Coated Tools

AYYAPPAN S, vengatajalapathi n 

11408

Machining of EN-31 Steel and Experimental Analysis of Various Process Parameters Using Minimum Quantity Lubrication

Ashutosh Saini, Sanjeev  Yadav 

11411

Experimental investigations into ultrasonic assisted magnetic abrasive finishing of free-form surface

Akshay Kumar Singh, Girish Chandra  Verma, Vipin Shukla, Pulak Mohan Pandey 

11413

Effect of Tool Material on Trepanning of CFRP Composites

Jayasuriya B R, Krishnaraj V, Harsha Vardhan A 

11414

FEM Approach to Predict Three Jaw Chuck Stiffness and its Effect on Gripping Force for High Speed Turning and Experimental Verification

Karthik K S, Aslam Pasha Taj, Chandranmouli S R 

11416

Bactericidal Nanostructured Titanium Surface through Thermal Annealing

Deepak Patil, Mishi Wasson, Vivekanandan Perumal, S Aravindan, P.V Rao 

11424

Development of Indigenous Direct Drive Rotary Guide Bush Device and Establishment of 3 Spindle Synchronization for Sliding Headstock Automat

Deepak  S, Nagesh Nadig, Chandramouli S R 

11432

Fabrication of Gradient Density components through Extrusion based Additive Manufacturing

Shashi Ranjan Mohan, Simhambhatla  Suryakumar 

11434

Comparison of Single and Multiple Spot Resistance Welding of Sub-millimeter Thick SS304 and SS316 Sheets

Dhanraj Waghmare, Partha Saha 

11435

Development of 3-Axis Micro Step Resolution Desktop CNC Stage for Machining of Meso and Micro Scale Feature

Shweta Patil, Sandip Anasane 

11436

Fiber laser cutting of Nimonic C263 alloy and investigation of surface integrity

MUKUL ANAND, SHAKTI  KUMAR, Vikas Kumar, Alok Kumar Das, ANUBHAV KUMAR SHARMA, Niladri Mandal 

11447

PIV Study of Directional Solidification of a Binary Metal Alloy Analogue

Alok Kumar, Arvind Kumar 

11460

Generation of Three Dimensional Features on Ti6Al4V by EC milling

Koushik Mishra, SOURABH SINHA, B.R. Sarkar, B. Bhattacharyya 

11469

Enhancement in Machining Efficiency and Accuracy of ECDM Process Using Hollow Tool Electrode

Rajendra Kumar Arya, Akshay Dvivedi 

11472

Design and Development of Electrochemical Micro Machining (ECMM) Experimental Set-up for Micro-hole Fabrication

Pranesh  Dutta, Anwesa  Barman, Abhinav  Kumar, Manas Das 

11474

Evaluation of Cutting Force and Surface Roughness of Inconel 718 Using a Hybrid Ultrasonic Vibration Assisted Turning and Minimum Quantity Lubrication (MQL)

Habtamu  Alemayehu, Sudarsan Ghosh, P.Venkateswara Rao 

11497

Three Turn ECAP processing of AA6061 alloy: Microstructure and Mechanical Properties

Atul Dayal, ANKIT SAHAI, Rahul  Swarup Sharma, K. Hans Raj 

11512

Effect of Johnson Cook Material Model Constants on Predicted Chip Morphology and Forces in FE Simulations of Machining Operation for 93WHA Alloy

Chithajalu Kiran Sagar 

11524

Wear Performance Evaluation of AlCrN based Coating Deposited by PVD Technique under Dry and Cryogenic Environments

ABHISHEK SINGH, Sudarsan Ghosh, S Aravindan 

11531

On performance Evaluation of Helical Grooved Tool during Rotary Tool Micro-ultrasonic Machining

Sandeep Kumar, Akshay Dvivedi 

11542

Numerical Simulation of Heat Transfer and Fluid flow in co-axial laser cladding of Ti6Al4V alloys

VIJAY MANDAL, SHASHANK SHARMA, J Ramkumar 

11543

Multiresponse Optimisation of Electrochemical Micromachining Process Parameters of Micro Circular Dimple Using TOPSIS Approach

Mouliprasanth B, Lakshmanan N, Dr.P.Hariharan. 

11545

Investigation into micro-hole drilling on SS-304 by Sequential Electro-Micro Machining (SEMM) process

RAJU TAYADE 

11569

Experimental investigation on the forming of AA 5052-H32 sheet using a rigid body based impact in a shock tube

SAIBAL KANCHAN BARIK, R.GANESH NARAYANAN, NIRANJAN SAHOO 

11570

FEA of Electrical Discharge Machining on the Particle Metal Matrix composite

Koyilada Benarji 

11576

Tensile Strength of 3D Printed PLA Part 

Shilpesh  Rajpurohit, Harshit  Dave 

11593

Experimental investigations to evaluate machining accuracy of ultrasonic assisted milling on thin-walled structures

Girish Chandra  Verma, Pulak Mohan Pandey, Uday Dixit 

11602

High-Speed Conduction Mode Micro Laser Welding of Thin SS 304 Sheets: Modelling and Experimental Validation

SUSHIL PATEL, Akash Aggarwal, Arvind Kumar, V K Jain 

11619

Effect of tool pin profiles using tungsten carbide tool on microstructure and tensile properties of friction stir welded AA 6082-T6 thin aluminium alloy joints

Sameer MD, ANIL BIRRU 

11627

Effect of Air Delivery Pressure and Flow Rate on Surface Integrity in Minimum Quantity Cooling Lubrication Grinding of Inconel 718

Anirban Naskar, Amit  Choudhary, Biddu Bhushan Singh, Soumitra Paul, Anirban  Naskar 

11631

Surface roughness improvement by removal of recast layer on  Wire Electrical Discharge Machined surface through  Abrasive Flow Finishing Machine

MANJUNATH M A, MURUGAN A, PRAKASH VINOD, BALASHANMUGAM N 

11632

Study of Residual Stress in Nickel Micro Parts Made by Electrochemical Additive Manufacturing

Murali Sundaram 

11633

A Cyber Physical System Architecture for Smart Manufacturing

Jitin Malhotra, Faiz Iqbal, Sunil Jha 

11634

Development and Analysis of a Discrete Particle Swarm Optimisation for Bi-Criteria Scheduling of a Flow Shop with Sequence Dependent Setup Time

Anjana Viswanath, R Sridharan, P N RAMKUMAR 

11639

Performance evaluation of cryogenic cooling on output characteristics during turning of EN-24 steel

Alakesh  Manna, ARCHANA THAKUR, Sushant Samir 

11644

Effect of pin diameter in underwater friction stir lap welding of dissimilar materials: AA6061-T6 and AISI304

RAJU PRASAD MAHTO, Manan  Kinjawadekar, Chaman Gupta, Surjya K Pal 

11648

Investigations on the Influence of Size Effect on Surface Characteristics during Micro Endmilling of Inconel 718

ANAND KRISHNAN N, G VENKATESH, Jose  Mathew  

11662

A Method for Evaluation of Simple Torus Surfaces

T S R  Murthy 

11675

Machining of Borosilicate Glass Using Micro End Milling

VIPINDAS K, Jose  Mathew  

11680

Parametric optimization of micro electrical discharge drilling on titanium

Siddhartha Kar, Promod Kumar Patowari 

11683

Empirical Modeling of Average Cutting Speed during WEDM of Nimonic 263

Bhupinder Singh, Joy Prakash Misra 

11695

Effect of different geometric texture shapes on wettability and machining performance evaluation under dry and MQL environments

Sarvesh Mishra, Sudarsan Ghosh, Sivanandam Aravindan 

11711

Brazeability of synthetic diamond with steel substrate using two different active filler alloys

PRITHVIRAJ MUKHOPADHYAY, AMITAVA GHOSH 

11716

Friction Stir Welding of Al-Cu Alloy Metal Matrix Composites Reinforced with B4C and Graphite Particle Fabricated by Stir Casting and Thixoforming Method

Sekar K, Vasanthakumar P 

11725

Experimental & Numerical analysis of Plasma Nitrided XM-19 stainless steel

Shivanshu  Dixit 

11735

Development and validation of Gene Expression Programming meta model to forecast the machining performance parameters of Inconel-690

B​​​​​​inayak sen, Uttam Kumar  Mandal 

11741

Numerical Simulation of Micro-EDM process by Incorporating a Novel approach of Multi-Sparks

Devesh Kumar Chaubey, Mahavir Singh, J. Ramkumar 

11742

Analysis of Fiber Laser Micro-Grooving on 316 L Stainless Steel

Abhishek Sen, BISWANATH DOLOI, BIJOY BHATTACHARYYA 

11750

An Experimental Study on Single Point Incremental Forming of AA5083 Sheet using Response Surface  Methodology

GAUTAM KUMAR 

11752

Prediction and Comparison of Vision Parameter of Surface Roughness in WEDM of Al-6%Si3N4 and Al-10%Si3N4 using ANN

GURUPAVAN H R, RAVINDRA H V, DEVEGOWDA T M 

11768

Comparative Study of Feed-Forward and Recurrent Neural Networks in Modeling of Electron Beam Welding

Sanjib Jaypuria, SANTOSH KUMAR GUPTA, Dilip Kumar Pratihar 

11773

Nd: YVO4 Laser Welding of Two Transparent Polymers in Lap Joint Configuration

Nikhil kumar, nitesh kumar, Asish Bandyopadhyay 

11778

Performance Study of Electrical Discharge Drilling of Metal Matrix Composite

Anjani Kumar  Singh 

11781

Experimental study on electrical properties of electrochemical discharges for glass micromachining

JULFEKAR ARAB,  Pradeep DIXIT 

11785

Multi-objective optimisation of Electro Jet Drilling process parameters for machining of crater in High Speed Steel using Grey Relational Analysis

KALINGA SIMANT BAL, Amal Madhavan Nair, DIPANJAN DEY, Anitesh Kumar Singh, Asimava Roy Choudhury 

11796

Laser polishing of Wire Arc Additive Manufactured SS 316L

VINOD SINGH THAKUR, Manikandan M, Shalini Singh, Shivam  Mishra, Ankit  Kaithwas, Mani Prabu S S, Palani I A 

11797

Evaluation of surface morphology of yttria-stabilized zirconia with the progress of wheel wear in high-speed grinding

Amit Choudhary, Anirban  Naskar, Soumitra Paul, Amit  Choudhary 

11807

A Matlab based application to solve VRP using GA

Nikki Rathore, Pramod Kumar Jain, Manoranjan  Parida 

11845

STUDY ON DISSIMILAR JOINING OF MARTENSITIC STAINLESS STEEL (AISI 420) WITH CARBON STEEL (FE-410) USING MIG WELDING   :WABCO paper

Karthi s, Kumaresh babu sp, Balaji v p 

11943

On Modeling the thermal Behavior of Single and Quad Laser Melting of powdered Nickel Alloy

HEMNATH ANANDAN KUMAR, Senthilkumaran Kumaraguru 

11952

Influence of Tool Probe Offset and Varying Traverse Speed on Microstructure and Mechanical Properties of FSW Dissimilar joints of AA2024-T351 and AA7075-T651

ANIL KUMAR K S, Murigendrappa S.M, Hemantha Kumar 

12519

Grindability and Surface Integrity of Nickel Based Cast Superalloy, IN-738  by Vitrified Alumina Wheel

Srinivas Rao  Nandam, Venugopal  Rao, Amol A  Gokhale, Suhas S  Joshi 

12602

Design of Fixture for trimming of a composite material Shim by Abrasive Water Jet Machining

Kushal Singh, Ch. Venkateswarlu, B. Hari Prasad, A.P. Dash

12605

Fabrication and characterization of Helical Grooved Cylindrical Electrodes Generated by WED Turning Process

Krupa Serah Jacob, G.L. Samuel

12572

Simulating the effect of microstructure in metal sliding and cutting

Vandana A.S, Narayan K. Sundaram

12601

What do chip morphologies tell us about the cutting process?

Koushik Vishwanathan, Anirudh Udupa, Dinakar Sagapuram and James B. Mann

12600

Experimental investigation of AWJM parameters on titanium alloy Ti-6Al-4V using response surface methodology and evolutionary computational techniques

Gnanavelbabu A, Saravanan P

12598

Optimization of process parameters of bio-implant materials using WEDM

P. Hema, J. Mallikarjuna Rao, C. Eswara Reddy

11985

Energy consumption of welding based additively manufactured materials

Nandhini Raju, Balaganesan and Saravana Kumar G

11782

Effect of beam offset on dissimilar laser beam welding of Ti6Al4V and Inconel 718 superalloy

Anitesh Kumar Singh, KALINGA SIMANT BAL, Suman Sharma, Aditya Harbajanka, Mukesh Prasad, DIPANJAN DEY,Asimava Roy Choudhury

 

Only registered authors will be allowed to present their paper, subject to a limit of maximum two papers per registration. 
The papers submitted by the registered authors will be forwarded to M/s Springer. 
M/s Springer will publish the papers selected according to their publication policy, as Proceedings Book Volume.
Authors have to register for the AIMTDR 2018 conference through the website (www.aimtdr2018.com) on or
before 24th October 2018.