Only Registered Author(s) will be allowed to present their paper, subject to a limit of maximum two... more
Authors Have to Register for the AIMTDR 2018 Conference on or before 24th October 2018.
Authors Kindly See the Tentative list of Accepted papers.
0
1
2

AIMTDR 2018 Countdown timer


Tentative list of accepted papers for Poster presentation

Printer-friendly versionSend by emailPDF version

 

AIMTDR 2018


General Instructions to Author(s):
Only registered authors will be allowed to present their paper, subject to a limit of maximum two papers per registration.
The papers submitted by the registered authors will be forwarded to M/s Springer.
M/s Springer will publish the papers selected according to their publication policy, as Proceedings Book Volume.
Authors have to register for the AIMTDR 2018 conference through the website (www.aimtdr2018.com) on or before
24 October 2018.  

 
 

Tentative list of accepted papers for Poster presentation

 

 

Paper Id

Paper Title

Author(s) Name

11489

Investigation on quality of in-house fabricated PLA filament for 3D printing application

Ashish Prajapati, Harshit Dave, Shilpesh Rajpurohit

11577

Effect of Build Orientation on Mechanical Strength of FDM Printed PLA

Naushil  Patadiya, Harshit  Dave, Shilpesh  Rajpurohit

11013

Design of Prototype for Multijet Ice 3D Printing System

Pushkar Kamble, Subodh Chavan, Yogesh Patil, Ashik  Patel, K P Karunakaran

11468

Mathematical Modeling for Linear Shrinkage Selected by TOPSIS Technique in PLA Part Fabricated by 3D Printing

Jonty Mago, Rajat Rajput, Vineet Srivastava

11296

Tribological investigation and analysis of wear performance of AA6061/SiC/B4C hybrid nano composites

Shubhajit Das, M Chandrasekaran, S Samanta

11601

Experimental Evaluation of Cooling Effect in Steel  Turning using Near Dry Lubrication

Laxman Abhang

10922

Electro-magnetic Transient-thermal Modeling of High-frequency Induction Welding of Mild Steel Plates

Ankan Mishra, Sukhomay Pal, Swarup Bag

11278

Application of Artificial Neural Network in Prediction of Surface Roughness while Turning of AISI 4340 Steel Using Zirconia Toughened Alumina Inserts

Bipin Singh, Nitai  Adak, Shibendu Roy, Nilrudra Mandal

11784

The Effect of Process Parameters on Pulsed Through Transmission Laser Welding of Acrylic and Polycarbonate Sheets

Nitesh Kumar, Nikhil Kumar, Asish Bandyopadhyay

11671

Alleviation of regenerative chatter using MRF dampers during Milling

Natesan Nithya

11567

Numerical Modelling and Simulation of Single and Multi-Spark Impacts in Electrical Discharge Machining

Jibin T Philip, Basil Kuriachen, Jose  Mathewâ

11770

A thermo-mechanical coupled Finite Element Analysis of Resistance Spot Welding of Automotive Steels

Sagar Rathod, Sunil Ghunage

11480

A coupled thermal-structural model for welding of aluminium alloy plates

Tapas Bajpai

11395

Teeth Wear enhancement along the Tooth Profile of Spur Gear Drive by Balancing the Fillet Stress through Positive Correction Factor

Ravivarman R, Palaniradja K, Prabhu Sekar R

11284

An experimental investigation on horizontal surface grinding of mild steel using different lubricating oils

Soutrik Bose, Nabankur Mandal

11141

ARM Controller based Table Top Smart Loom for generating basic weaves

Kumaravelu Rajabather

11729

Influence of flow domain parameters on hot water actuation of shape memory alloy spring for barrier gate system

Mithun R, Tameshwer Nath, Mani Prabu S S, Palani I A

10913

Design and Development of Cartridge-Based Automated Fluid Delivery System for Ball End Magnetorheological Finishing Process

Zafar Alam, Dilshad Ahmad Khan, Faiz Iqbal, Aman Kumar, Sunil Jha

10897

PRODUCT DESIGN DEVELOPMENT AND STRUCTURAL STRESS ANALYSIS OF CHAIN CUTTING AND RIVETING TOOL FOR AUTOMOTIVE VEHICLE APPLICATION.

K Ganesh Babu, G Ponsanjay, R Ramanathan, Mv Tamilselvaa

10801

Study on Microstructural and Mechanical Properties of Al–Cu dissimilar metals joining by Friction Stir Welding

Nilesh Ghetiya, Devang Sisodia, Kaushik Patel

11003

Effect of preheating and water cooling on the wear properties of FS welded AA6082 joint

Shubham  Verma

11014

Modification of Aluminium Alloy Surface Composite Reinforced with ZrO2 Particles Fabricated through Friction Stir Processing

Surendra Kumar Patel, Virendra Pratap Singh, Basil Kuriachen

11093

CHARACTERIZATION AND  MECHANICAL PROPERTIES OF  AA-SiC FUNCTIONALLY GRADED MATERIAL(FGM) FABRICATED USING POWDER METALLURGY

Vijay Salkapuram, Chalamalasetti Srinivasarao, Satish K

11115

Aging behavior of hot deformed AA7075 aluminium alloy

I  Sudhakar, Tutika  Sai Saran

11149

Correlation between Mechanical Properties and Microstructure of Fe-Ti-Ni alloys fabricated by Powder Metallurgy

Arthur Jebastine Sunderraj D, Ananthapadmanaban D, Arun Vasantha Geethan K, Vijayananth S

11206

The Effect of Grain size, Grain Orientation, and Residual Stresses on Photochemical Machining of Co-Cr L605  Alloy

Shrikant Thorat, Ashish Pailwan, Sadaiah Mudigonda

11219

Multi response optimization of end milling on Al 6061-SiCp metal matrix composite-Hybrid GRA PCA Ap-proach

Ravi Sankar B, Umamaheswarrao P

11362

Effect of Tool Plunge Depth on the Mechanical Performance of Joints Fabricated by Dieless Friction Stir Form Joining of Dissimilar Grade Aluminum Alloys

Tinu P Saju, R.Ganesh Narayanan

11380

DECISION MAKING SYSTEM FOR ACCEPTING/REJECTING OF AN ORDER IN MTO ENVIRONMENT

Hari Krishna, Sreekar Chodavarapu

11390

Towards extending ECAP technology from lab scale to manufacturing by enhanced multi-pass Continuous ECAP process

Ankit Sahai, Atul Dayal, Rahul  Swarup Sharma

11430

Evaluation of Mechanical Properties of AZ31-nHAP Surface Composite  fabricated by Friction Stir Processing

Kalyana Manohar

11466

Influence of Perturbations on Actuation Characteristics of Friction Stir Welded Shape Memory Alloy

Mani Prabu S S, Mithun R, Sohel Khan, Jayachandran S, Manikandan  M, Yeshwanth Sai, Anbarasu Manivannan, Palani I A

11636

Study of Mechanical properties and Thermal conductivity of Carbon and Basalt fibre reinforced hybrid polymer composites

V Durga Prasada Rao, N V N Sarabhayya, A Balakrishna

10844

Development and Correlative Microstructural-Nanoindentation Investigation on Ni-based + 10% Al2O3 Nanocomposite Microwave Clad on Hydroturbine Steel

Bhupinder Singh, Sunny Zafar

11033

Study of heat treatment effect on microstructure of PTA weld deposited surface of SS 316L steel

Hardik Naik, Dhiraj Deshmukh, Vivek Kalyankar

11058

Evaluation of surface characteristics of PTAW hardfacing based on energy and powder supplied

Dhiraj Deshmukh, Vivek Kalyankar

11295

Investigation of Surface Coating on Inconel 718 Alloy with Silicon Carbide Powder

Nivas S. S, Balasubramanian P

11389

Evaluation of mechanical properties of Ti6Al4V built by composite coating of WS2, CNT, Ni and Ti6Al4V powders through laser cladding process

Shakti  Kumar, Umar Arif, Vikas Kumar, Mukul Anand, Amitava Mandal, Alok Kumar Das, Rashi Tyagi

11477

Increase in hardness and wear resistance of Ti-6Al-4V surface by in-situ laser coating of Ti and Al based hard ceramics

Dipanjan Dey, Kalinga Simant Bal, Imran Khan, Ishan Bangia, Anitesh Kumar Singh, Asimava Roy Choudhury

11669

Friction stir welding for joining of dissimilar materials

Suryakanta Sahu, Omkar Mypati, Soumya Sangita Nayak, Pooja Sarkar, Surjya Kanta Pal, Shiv Brat Singh

11726

Investigation on structural and wear characteristics of Mg AZ91/Fly ash surface composite fabricated by friction stir processing

Hemendra Patle, Ravikumar Dumpala, B. Ratna Sunil

11392

Computation of End-Cutting-Edge Wear of Single Point Cutting Tool using Image processing

Vishal Kumar Singh, Shrikrishna N. Joshi

11312

A Critical Study of Bead-on-Plate Laser Welding of Niobium Alloy PWC-11

Santosh Kumar Gupta, Susmita Datta, Sanjib Jaypuria, Dilip Kumar Pratihar, Partha Saha

11317

Laser beam treatment of Nimonic C263 alloy study of mechanical and metallurgical properties

Vikas Kumar, Anubhav Kumar Sharma, Shakti Kumar, Mukul Anand, Alok Kumar Das

11365

Effect of high speed drilling on production rate and cost

Prabukarthi A, Krishnaraj V, Sindhumathi R, Prakash K

11463

Tool wear behavior in milling of hardened Custom 465 steel

Prasath  V, Krishnaraj  Vijayan, Kanchana J, Geetha Priyadharshini B

10707

Micro-feature Machinability Study in Biomedical Co-29Cr-6Mo Alloy using Different Electrodes via µ-EDM

Siddhartha Kumar  Singh, Harlal Singh Mali

10710

Micro Tool Fabrication and Micro-ED Milling of Titanium Alumina Ceramic-Composite

Rupali Baghel, Harlal Singh Mali, Vivek Baghela

10811

Investigation on the Effect of KrF Excimer Laser Ablation on the Microstructure and Chemical Composition of WC-Co Composite

Partha Saha, Joydeep Kundu, Sankha Shuvra Das, Jonnalagadda Naga Vamsi Krishna

10848

Investigation of electrochemical micromachining process using Ultrasonic heated electrolyte

Soundarrajan M, Thanigaivelan Rajasekaran

10993

Influence of Chip Thickness Models on Deflection Aspects of an Endmill Cutter and a Spindle Bracket of a Miniaturized Machine Tool

Rajesh Babu Kadirikota

10996

Micro-hardness improvement of HSS using tungsten tool through micro-electrical discharge process

Shalini Mohanty, Avijit Roy, Brij Bhushan, Alok Kumar Das, Amit Rai Dixit

11084

Comparative Study of Anti-Reflection Coatings on PV cells by SiO2 and TiO2 Nano particles

Rajkamal S, Prabhakaran G, Suresh Kumar  P

11196

Experimental investigations into micro Wire Electrical Discharge Machining process for the machining of Ti-6Al-4V

Mahavir Singh, V.K. Jain, J. Ramkumar

11204

Influence of discharge energy on electrical discharge machining of Ti-foam material

Avinash S, Karthick Chetti, Haribhaskar M, Jeyanthi Subramanian, Giridharan Abimannan, Krishnamurthy Ramalingam

11309

Gang-Drilling of Square Micro-Holes on Glass using USM

Tapas Debnath, Keshob Kumar Patra, Promod Kumar Patowari

11345

Parametric Optimization of Micro Ultrasonic Drilling of Quartz Based on RSM

Santosh Kumar, B Doloi, B Bhattacharyya

11441

Micro Dimple Array Fabrication by Through Mask Electrochemical Micromachining

Subrata Mahata, Sandip Kunar, Bijoy Bhattacharyya

11457

Selection of electrolyte flushing strategy and influence of flushing parameters on geometry of microslits during WECM

Subhrajit Debnath, Sovan Maity, Bijoy Bhattacharyya

11554

Empirical Modelling and Optimization of Bio-micromachining on Antimicrobial Copper to Fabricate Micro-mixing System

Abhishek Singh, Arul  Manikandan, Mamilla  Ravi Sankar, Kannan Pakshirajan, Lintu Roy

11587

Finite Element Simulation and Experimental Investigations to Predict Tool Flank Wear Rate during Micro Turning of Ti-6Al-4V Alloy

Jiju V. Elias, Asams S, Jose  Mathewâ

11738

Parametric Analysis of Surface Finish Obtained During Micro-channel Milling on Zirconia (ZrO2) Using Pulsed Fiber Laser

Omar Faruk Biswas, Abhishek Sen, Golam  Kibria, Biswanath Doloi, Bijoy Bhattacharyya

11086

Investigation and evaluation of erosion efficiency in micro-EDM dressing of biocompatible Ti6Al7Nb material

Md Shamim Shah

11099

Numerical Analysis of Thermal Stresses in Selective Laser Melting

Rahul Sharma, Arvind Kumar

11710

Obtaining Different Heuristics to Solve Simple Type I Assembly Line Balancing Problems using Slope Indices

Baskar A, Anthony Xavior M, Nithyanandan  N, Dhanasakkaravarthi B

11705

Modeling of Areal Surface Roughness using Soft Computing Based ANN and Genetic Algorithm to Estimate Optimal Process Parameters during Wire Electrical Discharge Turning (WEDT) of Inconel 825

Jees George, Ravi Chandan, Manu R, Jose Mathew

11293

Optimization of Process Parameters during Non-Axisymmetric Stretch Flanging Process

Sai Dhruthi Killi, Harit K Raval, Piyush Joshi

11739

Modeling of Mechanical Residual Stresses in Micro End Milling of Ti-6Al-4V Alloy

Rahul Yadav, Vipindas K, Muni Sekhar Kattari, Jose Mathew

11182

Experimental Investigations on C-263 alloy by Electrochemical Milling

Koushik Mishra, Sourabh Sinha, B.R Sarkar, B. Bhattacharyya

11418

Design and Development of Tool Electrode for Electrochemical micromachining using Reverse EMM Technique

Sangeethakrishnan S, Rajkeerthi  E, Dr.P.Hariharan, Bhavesh Ganesan

11805

Fluidized Bed Hot Abrasive Jet Machining (FB-HAJM) of K-60 Alumina Ceramic

Basanta Nanda

11950

Suitability assessment of different tool electrode materials in machining of NiTi-SMA for bio-medical applications using micro-EDM

Jibin Boban

11688

Pulse and Work Revolution Parameters of Wire Cut Electrical Discharge Turning On Ti-6Al-4V alloy

Ram Prakash S, Rajkumar K, Selvakumar G

10890

Investigations on Precision Forming of Thin Sheet Metal Parts by Pulsed Laser using Finite Element Simulations and Experiments

Kuntal Maji

11475

Thermal Simulation of multi sparks Electric Discharge Deposition (EDD) Process

Deepak Kumar  Prasad

11568

Experimental Study of Nanosecond Fiber Laser Micromilling of  Ti6Al4V Alloy

Ashish Kumar  Sahu

10957

Experimental investigations on the effect of energy interaction durations during micro-channelling with ECDM

Tarlochan Singh, Akshay Dvivedi

10830

 Parametric study of a newly developed magnetorheological honing process

Talwinder Singh  Bedi

10868

Investigation on Surface Roughness during Finishing of Al-6061 Hybrid Composites tube With Traces of Rare Earth Metals Using Magnetic Abrasive Flow Machining

Vipin Sharma, Vinod Kumar, Ravinder Joshi

10969

Modelling and Analysis of Change in Shape of Sintered Cu-TiC Tool Tip during Electrical Discharge Machining Process

Arminder Singh Walia, Vineet Srivastava, Vivek Jain, Mayank Garg

11012

 Nano-Finishing of Internal Surface of Power Steering Housing Cylinder Using the Rotational Magnetorheological Honing Process

Sunil Paswan

11151

Thermal Effect of Different Shaped Surgical Tools During Grinding of Bovine Bone

Atul Babbar, Vivek Jain, Dheeraj Gupta

11616

Evaluation of Side Wall Roughness and Material Removal Rate in Vibration Assisted Powder mixed Micro-EDM Drilling on Inconel 718

Deepak G Dilip, Satyananda Panda, Jose Mathew

11068

Design of Acoustic Emission and vibration monitoring systems for turning process and online monitoring of the process

Tejas Madrewar, Prakash Pantawane

11801

Experimental Investigation of Orthogonal Cutting of Inconel 718 Using TiAlN Coated Insert

Gobivel K

11685

Effect of Dressing Infeed on Alumina Wheel during Grinding Ti-6Al-4V under Varying Depth of Cut

Manish Mukhopadhyay, Souvik Chatterjee, Pranab Kumar Kundu, Santanu Das

11224

Experimental investigation on Dewaxed tungsten carbide based Self-lubricant cutting tool material

A Muthuraja

11756

Micro structural and Size Accuracy Study of Electro-Chemical Machined Aluminium alloy Features

Ranjeet Kumar Sahu, Vijay Kumar  Pal, Pankaj Kumar

12591

Achievement of high quality microchannels into Ti6Al4V using ultra-short pulsed laser

Murugesh M, Samuel G. L.

11255

Hard Turning of AISI 4340 Steel Using Two Types of Carbide Inserts

Santanu Das, Bijoy Mandal, Krishnendu Mondal, Anjan Kumar Adak

11351

The role of hBN solid lubricant reducing cutting forces of dry machined Al-B4C Composite

Rajkumar K, Rajesh M, Gnanavelbabu A, Nambiraj K.M

11373

Investigations in to the effect of varying electrode diameter on cutting rate and kerf width in WEDM of   varying thickness Inconel – 718

Susheel Dhale, Mahesh Kulkarni

11383

Comparative Evaluation of Drilling on GFRP Made by Different fabrication Techniques

R Raja, Sabitha Jannet

11462

Effect of machining parameters on surface integrity in the end milling of Inconel 625

Ramesh  Rajguru, Hari Vasudevan

11343

Investigation on Machining Responses During Hard Turing of AISI D2 Steel under Dry, Wet and Nano based MQL conditions.

Vaibhav Chandra, Sudarsan Ghosh, P.V Rao

11039

Optimization of Cutting Parameters for Hard Turning of WC-Co-Ni-Cr (15% binder) Mill Rolls on CNC Lathe with Polycrystalline Diamond

Mahesh J Hunakunti, Vaishali Jagannath, Ramesh S Rao, S Srinivas

11478

Experimental Investigation on Influence of Process Parameters of Abrasive Water Jet Machining on Kerf Taper of Glass Fiber Reinforced Polymer Composites

Harsh Prajapati, Puneet Kumar, Dr Shailendra Kumar, Dr. Ravi Kant

11759

Investigation on the Influence of Process Parameters on Surface Roughness and Kerf Properties in Abrasive Wa-ter Jet Machining of Carbon Fibre Vinyl Ester Composite

Bhavik Tank, Dr Shailendra Kumar

11645

An Experimental Study of Electrical Discharge Machin-ing of Incoloy 825 Superalloy

Sandeepkumar Patel, Harsh Prajapati, Dr Shailendra Kumar

11237

Effect of pre and post welding processes on the distortion pattern in a SAW welded butt joint of P91 steel plate

Saurav Suman, Pradeep Pankaj, Avinish Tiwari, Mr. Biswas, Pankaj, Basil  Kuriachen, Abhijit Sinha

11679

Mechanical and Crystallization Behaviour of Sisal Fiber and Talc Reinforced Polylactic Acid Composites

Suresh Babu A, Jaivignesh M, Poovarasan D

10711

Geometrical Modeling and Performance Analysis of Textile Composites Using Python Scripted Software Platforms

Pragati Priyanka, Harlal Singh Mali, Anurag  Dixit

11199

Modelling of welding sequences for minimization of weld induced distortions and residual stresses

Saurav Suman, Avinish Tiwari, Pradeep Pankaj, Pankaj  Biswas, Basil  Kuriachen, Abhijit Sinha

11793

Power Law Creep model in ABAQUS for Linear Low Density Polyethylene (LLDPE) from Experimental Data

Anshika Sahu, Pozhil Sn, Sachin Waigaonkar

11765

Investigations on synthesis of Porous NiTi Shape Memory Alloy Structures using Selective Laser Melting techniques

Ankita Sahu, I.A. Palani, Sachin  Bhirodkar, C. P. Paul, K. S.  Bindra

11638 

Intensifying Hands-on Learning and Experimentation of fused deposition modeling three dimensional printers

Pushpendra Yadav, Ishant  Singhal, Ankit  Sahai, Rahul Swarup Sharma

11313

Comparison between advanced cutting tools to achieve a better cutting condition for the machining of aluminium

Sisira Kanta Pattnaik, Minaketan Behera, Sachidananda Padhi, Saroj Kumar Sarangi

11766

A new Approach to Control the Position of Joint Arm Robot Using Image Background Subtraction Technique

Pramod Kumar Thotapalli, Vikram Kumar Ch R

11116

Evaluation of machining parameters during dry cutting of Ti6Al4V using Taguchi’s Orthogonal Array

Pawan Kumar, Joy Prakash  Misra

11384

EFFECT OF WHEEL AND JOB MATERIAL ON THE PERFORMANCE OF MACHINE VISION SYSTEM FOR MONITORING GRINDING WHEEL LOADING

Ragavanantham S, Karthikeyan D D

11198

A FUZZY TECHNIQUE FOR WIRE EDM OF BALLISTIC GRADE ALUMINIUM ALLOY

Thakur Singh

10919

Part Program Based Process Control of Ball-end Magnetorheological Finishing

Faiz Iqbal, Zafar Alam, Dilshad Ahmad Khan, Sunil Jha

11559

Parametric Optimization and Surface Characterisation of Micro Electrical Discharge Machining Drilling Process.

Jush Kumar Siddani, Srinivas C, Ramesh N.N

11482

Investigative Study of temperature produced during Turning Operation using MQL and solid lubricants

Anand Somabhai Patel, Mayur Makhesana, Kaushik Patel

11205

Manufacturing of Autoclaved Aerated Concrete (AAC): Present Status and Future Trends

Amit Raj, Arun Borsaikia, Uday Dixit

11620

A study on hardness of CRNO electrical sheets for edge joining through TIG welding

Nitin Kumar Lautre, Bhushan Y. Dharmik

11020

Investigation of General Welding Defects Found During Friction Stir Welding (FSW) of Aluminium and its Alloys

Virendra Pratap Singh, Surendra Kumar Patel, Basil Kuriachen, Saurav Suman

11223

Effect of Different Activated Fluxes on Mechanical  Properties of DSS 2205 in Pulsed-Tungsten Inert Gas Welding

Dhananjay Satelkar, Bhagwan Jogi, Shrikant Thorat

11433

Effect Of Varying Weight%  Of Coarse and Nano Alumina Particulates On The Mechanical Behaviour of Al 7075 Alloy Composites Produced By Stir Casting Route

Sirajudeen N, Abdur Rahman, Venkata Rangarao  Painam

11488

Ultrasonic Welding of Molybdenum using Aluminum interlayer

Sanjaykumar Patel, Harshit Dave, Himanshu Patel

11649

Design and fabrication of Aluminium/Alumina ultrafine composite and Functionally Graded Material using Powder Metallurgy route

Aravind Tripathy, Saroj Sarangi, Rajat Gupta, Anil Kumar Chaubey

11209

Microstructure and Impression creep behavior of the Bi and Sr added Squeeze-cast AZ91 Mg alloy

Tanmoy Das, Jinu Paul

11299

Effect of sensitization on electroless nickel plating of MoS2 nanoparticles

N. Arunkumar, N.E. Arun Kumar, P.Eashwar Siddharth

11731

Assessment of Hole Quality during Drilling of Al/CFRP Stack Composite

Tarakeswar  Barik, Swagatika  Sarangi, Dr Kamal Pal

11788

EXPERIMENTAL INVESTIGATION OF MICRO-CHANNEL CHARECTERISTICS IN Nd: YAG LASER TRANSMISSION MACHINING OF PMMA

Subham Biswas, Nilanjan Roy, Ranjib Biswas, Arunanshu Shekhar Kuar

11505

Analysis of ELID assisted grinding operation for granite finishing

Jaydeep Shinde, Sagar Sapkal

11075

EXPERIMENTATION AND SIMULATION OF MULTI HOLE EXTRUSION PROCESS

Pradeep Yada

10954

Modal Analysis of Horns used in Rotary Ultrasonic Machining

Praveen Kumar Rai

11421

Analysis of surface topography in NC turning and drilling operations using autocorrelation function

Ushasta Aich, Simul Banerjee

11470

Experimental study on Machining of EN24 using Minimum Quantity Lubrication

Jitendra  Bhaskar, Gaurav Tyagi

11230

Influence of Heat Input on Corrosion Resistance of Duplex Stainless Steel Cladding on Low Alloy Steel by FCAW

Santanu Das, Manas Kumar  Saha, Ajit Mondal, Ritesh Hazra

11257

Effect of test conditions on tribological behavior of NiTi-TiN coated Ti-6Al-4V alloy fabricated by TIG cladding method

Abhratej  Sahoo, Dipak Waghmare, Arti  Sahu, Manoj  Masanta

11238

Study of Sliding Abrasive Wear Behavior of TiC-TiB2 Composite Coating fabricated on Titanium Alloy by TIG Cladding method

D Tijo, Ajay Menon, Manoj  Masanta

11280

Sliding abrasive and adhesive wear behavior of TIG cladded NiTi-W coating deposited on Ti-6Al-4V alloy

Jyotirmoy Garbyal, Chinmaya Padhee, Abdu Raheem, Manoj  Masanta

11772

Experimental Evaluation of Tensile strength of GFRP laminates with silica and study on their drilling behaviour.

R Raja, Sabitha Jannet

10891

Selection of Aluminum Hybrid Metal Matrix Composite Material using Additive Ratio Assessment Approach and comparing with the experimental results varying different Weight Percentage of the Reinforcements.

Soutrik Bose, Titas Nandi

11618

Experimental Investigation and Mechanical Characterization of Double Sided Submerged Arc Welding of AISI 304 Austenitic Stainless Steel

Sridhar P.V.S.S, Shailesh Kumar, Kaushik Pal, Bhaskar Kumar Chakraborty, Rituraj Bhattacharjee, Subhashis Majumder, Pankaj Biswas, Pinakeshwar  Mahanta

11580

A Comparative Study :Influence of varying weight% of as-received and nano Al2O3 particles on the tribological behaviour of Al 7075 alloy composites prepared by stir casting method

Abdur Rahman, Sirajudeensirajudeen N, Venkata Rangarao  Painam

11391

The Effect of Normal Load and Sliding Frequency on the Reciprocating Friction Behavior of Nano-Crystalline CuO Based Alumina Ceramics

Partha Haldar, Tapas Kumar Bhattacharya, Nipu Modak

10845,  

Joining of Different Thickness Dissimilar Materials SS 316L/SS 310 by µ-PAW Process

Swagat Dwibedi, Swarup Bag

11274

Dielectric and mechanical behaviors of lead calcium  titanate borosilicate glass ceramics doped with ferric oxide and its tribological optimization

Satyam Gautam,  Sangeeta Das, Chandkiram  Gautam, Uday Dixit, Abhishek Madheshiya, Diptimayee Tripathy

11762

Investigation on Electro-discharge Machining of Ti6Al4V Alloy Using Tapered Tool

Arka Mondal, Prithwiraj Roy, Souren Mitra

11769

Cutting Speed and Diagonal Dimensional Deviation Analysis in Wire Electrical Discharge Machining of Aluminum Alloy

Kingshuk Mandal, Soumya Sarkar, Souren Mitra, Dipankar Bose

11696

Effect Of Sigma Phase on Dry Sliding Wear Resistance and Surface Roughness of ASTM A890 Grade 6A Duplex Stainless Steels

Nithin Raj P, Anandu P Sivan, Riyas V, Sekar K, Joseph M A

11786

Experimental Evaluation of Surface Roughness, Dimensional Accuracy and MRR in Cylindrical Grinding of EN 24 Steel

Pankaj Mohire, Raju Pawade

10792

Characterization and Mechanical Behaviour of Zirconia Reinforced Aluminium Matrix Nanocomposites Fabricated through Powder Metallurgy Technique

Sajjad Arif, Tanwir Alam, Tariq  Aziz, Sufian Raja, Akhter Ansari

11302

Effect of welding parameters on Tensile strength of AA7075-T6 friction stir welded joints

M Bala Chennaiah, Podaralla Nanda Kumar, Dr.K Prahlada Rao

10968

PLA based Material design and Investigation of its properties by FDM

Ramesh M, Panneerselvam Kavan

11282

Experimental Investigations of Printing Parameters of Fused Deposition Modelling Based 3D Printers for Average Surface Roughness

Jitendra  Bhaskar, Apoorv Srivastava

11670

Simulation of Extrusion of Thermoplastic Binder in Additive Manufacturing Process

Sunidhi Dayam, Satwik Priyadarshi, Puneet Tandon

12590

Experimental And Numerical Investigation Of The Flexural Behaviour Offused Deposition Modelling Parts

Gokulakrishnan Jothibabu, Saravanakumar Gurunathan

11728

Atmospheric plasma sprayed 25 wt. % WO3-SnO2 coating: Gas sensing capability in the presence of ethanol and acetone

Vibhav Ambardekar, Partha Pratim Bandyopadhyay, Subhasish Basu Majumder, Vibhav Ambardekar

11800

Application of Low-Cost Natural Binders in Direct 3-D Printing of Sand Molds

Madhvendra  Tiwari, Devanshu  Kathrecha, Kuldeep  Meena, Kaushal Desai, Anand Plappally

11509

Investigation of Mechanical Behaviour and Surface Roughness Properties on Copper Electroplated FDM High Impact Polystyrene Parts.

Sathishkumar Natesan, N. Arunkumar, L Balamurugan, L Sabarish, A Samuel Shapiro Joseph

12589

Performance Evaluation of Abrasive Water Jet Machining on AA6061-B4C-hBN Hybrid Composites using Taguchi Methodology

Gnanavelbabu A, Sunu Surendran K.T.

11267

Prediction of Machining Responses in Wire EDM on Stainless Steel-316

Ugrasen G

11451

Estimation and Comparison of Welding Responses using Multiple Regression Analysis and Group Method Data Handling Technique of Al6061 and Al7075 Material in FSW

Ugrasen G

11804

Effect of Friction Welding Parameters on Ferritic Stainless Steel and Copper Material by Multi-Objective Optimization using Grey Relational Analysis

Shanjeevi C

11363

Knowledge discovery by decision tree using experimental data in high speed turning of steel with ceramic tool insert

Ananda Rabi Dhar, Nilrudra Mandal, Shibendu Shekhar Roy

11706

Distributed Diagnostics, Prognostics and Maintenance Planning: Realizing Industry 4.0

Bhupesh Kumar Lad, Priyansha Choukse, Amit Kumar Jain

11082

Temperature profiling of microwave-metal discharge plasma channel using image processing technique

Anurag Singh, Apurbba Sharma

12588

Fabrication and characterization of helical grooved cylindrical electrodes generated by WED turning process

Suhas S Joshi, Jithin S, U.V. Bhandarkar

11394

Fuzzy Inference System-Based Neuro-Fuzzy Modeling of Electron Beam Welding

Sanjib Jaypuria, Santosh Kumar Gupta, Dilip Kumar Pratihar

10706

Effect of Micro ED-Machined Surface Roughness on Pressure and Temperature Characteristics in AISI 316 SS Micro-channel Heat Sink

Harlal Singh Mali, Vivek Baghela, Siddhartha Kumar  Singh

 

Only registered authors will be allowed to present their paper, subject to a limit of maximum two papers per registration.
The papers submitted by the registered authors will be forwarded to M/s Springer.
M/s Springer will publish the papers selected according to their publication policy, as Proceedings Book Volume.
Authors have to register for the AIMTDR 2018 conference through the website (www.aimtdr2018.com) on or
before 24 October 2018.